Author Topic: A Somewhat Faded 219 .30-30, Before and After Black Nitride  (Read 6306 times)

Exchipy

  • Newbie
  • *
  • Posts: 35
Re: A Somewhat Faded 219 .30-30, Before and After Black Nitride
« Reply #15 on: June 23, 2020, 10:11:32 PM »

Jim,

H&M Metal Processing regularly does Black Nitride treatment for individuals.  Last I checked, they charge a flat $200.00 per single load of parts, without being too fussy about how many guns contributed parts to that load (within reason).  Steel parts only; no springs or soft metals (brass or solder will be melted).  Go to their website to learn the details of the process and its benefits compared to other finishes (weather proofing and wear resistance).  Be prepared to be impressed.

Steve

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: A Somewhat Faded 219 .30-30, Before and After Black Nitride
« Reply #16 on: June 23, 2020, 11:33:59 PM »
Steve, Thanks for sharing this with us!

Exchipy

  • Newbie
  • *
  • Posts: 35
Re: A Somewhat Faded 219 .30-30, Before and After Black Nitride
« Reply #17 on: June 24, 2020, 02:45:17 PM »

Oh, another thing:  if you’re planning any drilling and tapping, be sure to do it before Black Nitride, ‘cause you won’t be doing it afterward.

Steve

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: A Somewhat Faded 219 .30-30, Before and After Black Nitride
« Reply #18 on: June 24, 2020, 02:50:58 PM »
Again, thanks for this additional information.

jrbauerjr

  • Newbie
  • *
  • Posts: 8
Re: A Somewhat Faded 219 .30-30, Before and After Black Nitride
« Reply #19 on: June 26, 2020, 04:05:24 PM »
Steve, thank you very much, it sure sounds like the way to go..

Jim

Exchipy

  • Newbie
  • *
  • Posts: 35
Re: A Somewhat Faded 219 .30-30, Before and After Black Nitride
« Reply #20 on: June 29, 2020, 10:59:19 PM »

Jim,

Gutting a 219 in preparation for black nitride, then getting it back together and functioning again - now that’s an adventure.  Report results, please, with photos.

Steve