Author Topic: Receivers  (Read 2204 times)

OhioMike

  • Newbie
  • *
  • Posts: 17
Receivers
« on: December 05, 2020, 12:43:06 AM »
Are 220 receivers standard across gauge and caliber?

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Receivers
« Reply #1 on: December 05, 2020, 09:01:10 AM »
Yes, all receivers are the same for both 219 and 220 actions.  I have purchased all gauges and all calibers (except .32-20) in my research for my book, and all are the same over all outside dimension size.    There was some misinformation on one forum saying the 12 & 16 gauge actions were larger than the 20, 28, and .410.  This is totally incorrect. 
« Last Edit: December 05, 2020, 11:09:27 AM by Garnett »

OhioMike

  • Newbie
  • *
  • Posts: 17
Re: Receivers
« Reply #2 on: December 06, 2020, 10:49:18 PM »
Thank you ( I think ;)). Now I can start looking for barrels/forearms

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Receivers
« Reply #3 on: December 07, 2020, 08:10:03 AM »
Forearms have different size barrel channels and attachment mechanisms and may have to be fitted to a particular barrel.  There are two different style of forearm attachment studs on the barrels I have examined.  They are pictured on page 101 of my latest book.  I am away from home and cannot post pictures of them.
« Last Edit: December 07, 2020, 01:49:52 PM by Garnett »

Sentry44

  • Jr. Member
  • **
  • Posts: 83
Re: Receivers
« Reply #4 on: December 27, 2020, 08:26:14 AM »
I own the majority of barrels, and you only need the large channel forearm for the 12 and 16 gauge.  The lower profile forearm works for all calibers, and smaller gauge shotgun barrels.

I can only speak for Utica parts, but safe bet it's the same in the Chicopee era.

Chris

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Receivers
« Reply #5 on: December 27, 2020, 08:30:44 AM »
Chris, thank for this new information.  It will be a help.  Do you have any thoughts on what the internal markings are that are sometimes stamped into the wood?  My first thoughts were that these numbers were for barrel size, but then I found the same number for different gauge barrels, so now I wonder if they are forearm outside dimension size or shape? 
« Last Edit: December 27, 2020, 02:04:03 PM by Garnett »