« previous next »
Pages: [1]

Author Topic: Utica 219, 30-30 win  (Read 7902 times)

mkd123

  • Newbie
  • *
  • Posts: 12
Utica 219, 30-30 win
« on: January 25, 2015, 07:11:20 PM »
Hi all, new to forum. I have a couple of Model 219's of which one is a utica gun (striker fired). It inconsistently misfires. I have completely disassembled, cleaned, polished rough spots and still suffer from misfires. There is a definitive difference in the striker sound with the misfires.  I have thought about replacing the striker assembly with one from GunParts Corp. Thanks in advance for any suggestions.

Respectfully
mkd123
Logged

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Utica 219, 30-30 win
« Reply #1 on: January 25, 2015, 09:24:33 PM »
This is really strange.  I have no idea what may be causing your problem, but maybe someone can help.  The striker assembly is not very expensive from GPC, and I would try that if it were my gun.  Please keep us posted.  Best wishes, Garnett
« Last Edit: June 06, 2016, 07:39:50 PM by Garnett »
Logged

mkd123

  • Newbie
  • *
  • Posts: 12
Re: Utica 219, 30-30 win
« Reply #2 on: January 26, 2015, 11:17:28 AM »
Thats what i planned to do, just wanted another opinion before i ordered. I plan on ordering a couple of mainsprings from Wolfe also

respectfully
mkd123
« Last Edit: June 06, 2016, 07:39:15 PM by Garnett »
Logged

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Utica 219, 30-30 win
« Reply #3 on: January 26, 2015, 05:03:26 PM »
I did not know Wolfe had mainsprings.  Thanks for sharing that with us.  I have always heard good things said about the Wolfe springs for other guns.
Logged

Mike Armstrong

  • Sr. Member
  • ****
  • Posts: 252
Re: Utica 219, 30-30 win
« Reply #4 on: January 26, 2015, 08:34:08 PM »
Yeah, that's very good to know, given the dearth of 210/220 parts out there.  Now we need a source of new firing pins and forearms irons!
Logged

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Utica 219, 30-30 win
« Reply #5 on: January 26, 2015, 11:03:21 PM »
When  I last looked, Numrich still had the stricker assembly for the early guns and regular type firing pins for the later ones.  They may be sold out.
Logged

mkd123

  • Newbie
  • *
  • Posts: 12
Re: Utica 219, 30-30 win
« Reply #6 on: January 27, 2015, 11:11:53 AM »
I ordered a list of parts for the early 219 yesterday from GunParts of which one was a striker assembly, 24.95 i believe. I received a confirmation email last night that indicated they would ship so i assume they are still in stock

respectfully
mkd123
Logged

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Utica 219, 30-30 win
« Reply #7 on: January 27, 2015, 02:13:06 PM »
Thanks for the update.
Logged

mkd123

  • Newbie
  • *
  • Posts: 12
Re: Utica 219, 30-30 win
« Reply #8 on: January 30, 2015, 06:52:33 PM »
Haven't recievd parts ordered from gun parts, but fixed the misfire issue. The bridge that the striker slides through was not squared. after a few measurements i cranked up the milling machine made a new one. after some polishing and final fitting, re=assembled and fired 40 rounds without a misfire. The firing pin strikes were almmost dead center.

respectfully
mkd123
Logged

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 1065
Re: Utica 219, 30-30 win
« Reply #9 on: January 30, 2015, 07:16:42 PM »
Thanks again for this update.  Glad you got it fixed.
Logged
Pages: [1]
« previous next »