Author Topic: Another 220 20  (Read 504 times)

Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Another 220 20
« on: February 11, 2018, 08:25:36 AM »
I’ve decided to try to sell my 220 20ga., 30” barrel.  I presume it’s full choke but I don’t see that marked.  The stock is cracking.  I mentioned in another thread that I’d decided not to attempt the repair myself.  I’m offering it here first.  I’ll get some pictures to add to this post.  Nice fixer upper for the right guy, it’s just not going to get used and I need to thin out my gun collection.  I also have never mailed/shipped a gun before.  Suggestions on making that go smoothly are welcomed.  I’d like to get $150 + shipping. 

Thank you.

Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 610
    • View Profile
Re: Another 220 20
« Reply #1 on: February 11, 2018, 09:00:36 AM »
Erich, As I understand the law, you can ship the gun to anyone with an FFL or a C&R license out side of your state.  You will need to provide them with a copy of your driver's license.  Most people use USPS but many use UPS.  Thanks for giving us first chance at it.  I look forward to the pictures.

Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #2 on: February 11, 2018, 09:29:43 AM »

Let me know if you want closer pictures of anything.  Also, the bore was very dirty (dusty) when I bought the gun.  Three passses with a bronze brush and it looked great.  I’ll leave this here until the end of February.  After that I’ll put it on gunbroker. 

Thank you

Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #3 on: February 11, 2018, 09:45:46 AM »



Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #4 on: February 11, 2018, 09:47:36 AM »





Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #5 on: February 11, 2018, 09:49:27 AM »





Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #6 on: February 11, 2018, 09:50:36 AM »





Garnett

  • Administrator
  • Hero Member
  • *****
  • Posts: 610
    • View Profile
Re: Another 220 20
« Reply #7 on: February 11, 2018, 01:09:52 PM »
These are good pictures.  I cannot see the crack in the stock.  It must be very small.  The games scene etching on the bottom of the receiver is nice.  It is found frequently on the early models. 

Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #8 on: February 11, 2018, 06:40:51 PM »
Thanks for the compliment.  I didn’t even notice the etching when I bought the gun.  It’s a nice touch.

Ericb

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: Another 220 20
« Reply #9 on: February 18, 2018, 09:46:02 AM »
Offers will be considered.